Features
There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.
Trio Kenwood Japan made classic vintage stereo integrated amplifier with 20 watts RMS power output.
Very good for small living rooms. Quality amplifier. Can be use with all devices through aux input or phono is useful for vintage turntables. All shiny traditional big knobs. Attractive silver finish front control panel. Suitable for 4 to 16 ohms loudspeakers.
Specifications:
Power Amplifier Section
Power Output: 2 x 20 W, at 8Ω, 20 Hz – 20 kHz
Dynamic Power Output: 100 watts 4Ω
Total Harmonic Distortion: 0.08% at rated power into 8Ω
Intermodulation Distortion: 0.04% at rated power into 8Ω
Power Bandwidth: 10 Hz at 50 kHz
Damping Factor: 30 at 8Ω
Speaker impedance: 4Ω to 16Ω
Preamplifier Section
Input Sensitivity/Impedance:
Phono : 2.5 mV/50 kΩ
Tuner: 150 mV/10 kΩ
Tape , Aux: 150 mV/50 kΩ
Signal to Noise Ratio:
Phono : 72 dB (for 2,5 mV input); 78 dB (for 5,0 mV input); 84 dB (for 10 mV input)
Tuner, AUX, Tape : 100 dB for 150 mV input
Maximum Input Level Phono: 150 mV (at 1 kHz, 0,8% THD)
Frequency Response:
Phono: RIAA standard curve ±0,4 dB
AUX, Tape: 20 Hz to 20 kHz ±1 dB
Tone Control
Bass: ±7,5 dB at 100 Hz
Treble: ±7,5 dB at 10 kHz
Loudness Control: 9 dB at 100 Hz (at -30 dB Volume level)
General
Power Requirements: 120/240 V, 50/60 Hz
Power Consumption: 185 watts
Dimensions (W x H x D): 380 x 140 x297 mm (14-31/32″ x 5-1/2″ x 11-11/16″)
Weight: 5,8 kg (12,7 lbs) Net
Reviews
There are no reviews yet.